Broad ranges of engineering activities are widely applied in both pre-development and product development, and in construction of many industrial branches, in power engineering, ecology, medicine and sports.
Means of transport
- External aerodynamics
- Calculations of lift and drag forces of cars, aircraft and locomotives
- Cars soiling
- Windows defrosting in extreme climatic conditions
- Internal aerodynamics
- Air distribution to secure temperature comfort of passengers (HVAC-Heating, Ventilating and Air Conditioning)
- Optimization of air-conditioning and ventilation units
- Separation and filtration of dust particles and water droplets
- Combustion products flow, analysis of aerodynamic impact on turbochargers components
- Under-hood flow simulation and flow in combustion engines
- Stress-strain and fatigue tasks, for example analysis of engine and chassis components
- Thermal load of components
- Cooling of beam disc
- Heat convection in cooling circuit
- Heat conduction from combustion to turbochargers components
- Design and optimization of waste heat recovery (WHR) systems
- Optical measurements
- Measuring of air inlet pipelines on shakers to determine critical spots and verify predicted deformations and shapes
- High-temperature measurements of engine manifold deformation and turbochargers' housings and brackets
- Measuring of exhaust pipes during operation and shapes visualization
Power engineering
- Aerodynamic analyses
- Optimization of valve and pipe bend flow
- Flow simulation in piston expander and diffusers
- Flow simulation of steam and mix of steam and air
- Cooling
- Cooling of hydro and wind power station generators
- Heat exchangers design for waste heat recuperation
- Optical measurements of power systems deformations
Ecology
- Aerodynamic analyses
- Optimization of valve and pipe bend flow
- Flow simulation in piston expander and diffusers
- Flow simulation of steam and mix of steam and air
- Cooling
- Cooling of hydro and wind power station generators
- Heat exchangers design for waste heat recuperation
- Optical measurements of power systems deformations
Aviation engineering
- Flow
- HVAC-Heating, Ventilating and Air Conditioning to secure temperature comfort of passengers
- External aerodynamics
- Optimization of air inlet and exhaust outlet
- Windows defrosting
- Measurement against condensation accumulations
- Optical measuring
- Deformations measurement by static and dynamic load of aircraft surfaces
- Deformation measurement and visualization of aircraft body modes
Ambient engineering
- Ventilation and air-condition of buildings
- Temperature and air moisture model
- Sun radiation load
- Air exchange in buildings
- Air conditioning units solutions
- Optimization of heat exchangers to lower noise of air-conditioning units
- Dusting simulation
- Separation of dust particles in proximity of buildings ventilation
- Propagation of particles in ventilation vents and in ventilated room
Industrial facilities
- Cooling, lubrication and media distribution
- Multi-phase calculation of oil flow to minimize leakages from oil circuit through labyrinths and piston rings
- Flow in machines and heat transfer
- Design of heat coolers and exchangers
- Simulation of cooling and heating in technology process (hardening shops, paint shops, iron works)
- Stress-strain and fatigue analysis of machine parts such as shafts, fan blades, reactor vessel
- Optical measurements of machine deformations to verify their kinematical and deformation design
Medicine
- Liquids and gases flow
- Optimization of vascular prosthesis geometry regarding dynamic behaviour during blood wave flow
- Stress-strain and fatigue analysis
- Load tasks of joint prosthesis and bone implants
- Mechanical design of implants
- Optical and mechanical measurements of permeability and deformations of vascular prostheses
Sport
- Aerodynamics of sport apparel and gear
- Stress-strain analyses and computations of sport gear, for example bicycles components
- Motion and deformation computing, kinematical analysis of results
Architecture
- Aerodynamics
- Optimization of external shapes of buildings against excessive wind load
- The flame spread and combustion in buildings
- Flow through porous media
- Strength analysis such as load floor construction of sports halls, bridges
- Measurement of deformation during the loading of large structures
Electronics
- Cooling
- Flow in computer cases and ventilating solution
- Cooling of electronic components
- Cooling of LED models
- Measuring of deformations during cutting, mounting, soldering and inspection of printed circuits
